CAR OBD Finder 4G 2.0

Download User Manual PDF

Frequently asked questions

Technical Sheet PDF

QUICKSTART-GUIDE

Please follow these simple steps:

1. Activate your device

Q: How can I power on and off the CAR OBD Finder 4G 2.0 device?

#image_827644957 { width: 100%; } @media (min-width:550px) { #image_827644957 { width: 50%; } } #image_1546311824 { width: 100%; } @media (min-width:550px) { #image_1546311824 { width: 50%; } } You can switch on the CAR OBD Finder 4G 2.0. By connecting the FINDER to the power supply the device has already been switched on

• Choose a subscription duration
• Select a service package (optional)
• Make payment

Activate now

2. Connect your device

• Install the device into the OBD port

3. Locate your device

• Download the Portal FINDER application

Google play store icon for downloading the paj finder portal app

or

• Access the FINDER Portal via your desktop browser

FINDER Portal Instructions

FAQ – CAR OBD Finder 4G 2.0

How can I power on and off the CAR OBD Finder 4G 2.0 device?

CAR OBD FInder connected to the OBD port of a vehicle

You can switch on the CAR OBD Finder 4G 2.0. By connecting the FINDER to the power supply the device has already been switched on

What do the LED indicators on the CAR OBD Finder 4G 2.0 signify?

Orange LED – GSM status

Signal	Meaning
The orange LED is blinking	There is no available GSM signal
The orange LED is off	The GPS Tracker is in standby mode or switched off
The orange LED is fixed	A GSM signal is available

Blue LED – GPS status

Signal	Meaning
The blue LED is blinking	There is no available GPS signal
The blue LED is off	The GPS Tracker is in standby mode or switched off
The blue LED is fixed	A GPS signal is available

How can I operate the FINDER Portal ?

Please have a look at our

FINDER Portal Manual

Why isn't the route recording feature working?

If the route recording is not working please try to restart your device.

Why is my GPS tracker not connecting to the FINDER Portal?

Make sure your FINDER is charged & switched on.To assist the connection, move the FINDER (short walk/drive) and restart if needed. If the FINDER still doesn’t connect, contact our support.

Why aren't the alarms activating?

Ensure your device has a stable network connection & perform a power cycle by turning the device on and off.If it still doesn’t work please contact our support team .

Why won't the battery charge?

Try using a different wall plug or charging cable, and ensure to turn on and off the device as part of the troubleshooting process